Your Local Roofing Contractor in Oklahoma City

Full Tear-Off

• Remove all roofing materials down to the bare decking.

Decking Inspection & Upgrades

• Inspect the wood decking for damage.
• If the decking consists of spaced boards (e.g., 1x8, 1x10), overlay it with 7/16" OSB sheathing to meet modern code.
• Repair or replace any damaged decking.
  

Flashing Work

• Re-flash chimneys, skylights, and any other components as needed due to deck height change.
  

Underlayment Installation

• Install synthetic felt underlayment (more durable than tar felt).
• Apply ice & water shield (leak barrier) in valleys, around chimneys, flue pipes, wall flashings, and other water-prone areas.
  

Edge Protection

• Install drip edge around the perimeter of the roof (1.5" x 1.5" or 2" x 2", depending on code).
  

Starter Strip Installation

• Lay starter strip shingles around the roof perimeter, rated for wind resistance up to 130 mph.
  

Shingle Application

• Install architectural shingles (main lines: Oakridge, Duration, Duration Storm, Duration Flex).
• Apply shingles per manufacturer specifications and wind rating needs.
  

Ventilation & Accessory Replacement

• Replace or install ridge vents, pipe boots, and any necessary ventilation systems.
• Replace damaged chimney or flue caps as needed.
  

Ridge Cap Installation

• Install ridge and hip caps (standard or high-profile, depending on choice).
  

Cleanup & Safety

• Clean up all debris.
• Use a magnetic roller to pick up loose nails around the property.
• Advise homeowners on safety around construction areas.
  

Final Documentation

• Provide a certificate of completion.
• Supply Class 3 or Class 4 shingle certification for insurance discounts if applicable.